If you own an ATV, you may wonder what some parts are for, even why such a small engine requires a battery, because it could start without one. So, will an ATV run without a battery?
Although it can run for a short period of time, it’s not something you can do for a prolonged period of time. Newer ATVs with advanced technology won’t run without a battery at all. Here’s what you must know about the battery in your ATV.
Why do ATVs need or use batteries?
Every internal combustion engine comes with a certain way of operation, fuel enters the cylinder together with air, and the piston compresses the mixture. When the pressure inside your engine gets to its maximum, a spark from the spark plug ignites the air and fuel mixture. This leads to combustion that creates a large amount of energy.
This is how an engine works, and ATV engines are no different. This is why you need a battery in your ATV since the spark that causes combustion comes from the electricity produced by it.
Will ATV run without a battery?
Some ATVs will run without a battery, although it’s not recommended. If the ATV has a pull-start, the engine’s stator and mechanical functions will allow you to use the ATV. However, if your ATV relies on electricity to start, the ATV won’t run.
ATVs can also run on a dead battery when the starting system and engine are mechanical. If your ATV has a pull-start, the engine will function without a battery. Additionally, ATVs with carburetors can also work without electricity from a battery.
However, running an ATV without a battery can cause tons of problems that will shorten and damage the life of your ATV. Therefore, you need to replace your ATV battery as soon as you realize it’s faulty.
What are the dangers of not having a battery in your ATV?
The main danger is not being able to start your ATV easily; kickstart motors are usually hard to start when they’re cold and can get harder to start overtime. Although modern bikes are easy to start with a simple button press, there’s a danger of not having a device that absorbs the energy from the alternator.
Once you’ve started the ATV, it will release extra electricity, too much for the spark plugs to use. This is where you’ll start having problems with your ATV’s internal systems. When the engine starts, the extra electricity is diverted into the battery, charging it and regulating the excess energy.
However, without a battery, the excess electricity is left to feedback into the system, causing unwanted sparks and surges in the engine. This will ruin almost every component connected to the electric system. Eventually, it will make the entire engine seize up, causing several repairs that can cost you a fortune.
Situations where you may not need an ATV battery
If your engine is running, you don’t need electricity to keep it running, but it may require the power to restart. If your ATV has a pull start, you’re on the safe side. The engine starting gadget uses manual power to start the engine.
Pull starts are usually found on lawnmowers and other smaller engines. You can use a wire or rope to crank the engine of these types of engines. If your ATV’s battery is dead, you can start your ATV with a pull-start, but you’ll still need to replace the battery as soon as possible. Pull start engines are mostly found on older models, so you may not enjoy this option if you bought your ATV recently.
Does an ATV battery charge while running?
An ATV uses a magneto system or stator system to charge its battery. This is a simple system found in the ATV’s engine. When the engine is running, the stator continues to generate an electric charge. Different electric components use some electricity, while the remaining power is used to charge the battery.
Does an ATV battery charge while running?
An ATV battery takes between 3 and 10 hours to fully charge, depending on your ATV model, the quality of the battery charger, and the power needed.
How do I keep my ATV battery charged?
There are various ways to keep your ATV battery charged, including smart chargers and solar panels. You can use solar panels with a wattage of between 2.5 and 5W to keep your battery charged. Solar panels with high wattage can damage your battery.
Smart chargers will keep your battery charged without the risk of overcharging. You just need to plug in the charger, and it will automatically monitor the ATV’s battery. If the battery is dying out frequently or quickly, you need to see a mechanic or dealer to run a load test.
As you can see, the battery of your quad bike is a crucial part of keeping it in good shape. Having it maintained and ready at all times will guarantee you a comfortable and effortless riding experience.